12-28-2016, 12:41 PM
Hello,
I'd like to boot my sorio from SDcard instead of the internal eMMC. Here are some outputs I got:
Storio 3 without eMMC and without SDCARD:
With a prepared SDcard I receive this:
The problem seems to be hat the MBR's tag not match.
Is anybody able to post his helpful comment here?
I'd like to boot my sorio from SDcard instead of the internal eMMC. Here are some outputs I got:
Storio 3 without eMMC and without SDCARD:
Code:
iROM v3 Entry A400-S160 MHz
SPI Boot...(ID: 0x00) Fail
Nand Boot...NF_NON_SHARE->Fail
SDC/eMMC Boot...cmd SD_STATUS = 0x304
cmd SD_STATUS = 0x304
cmd SD_STATUS = 0x1304
Fail
cmd SD_STATUS = 0x304
cmd SD_STATUS = 0x304
cmd SD_STATUS = 0x1304
usb_reset()
usb_initial()
USB/ICE Service EntryWith a prepared SDcard I receive this:
Code:
iROM v3 Entry A400-S160 MHz
SPI Boot...(ID: 0x00) Fail
Nand Boot...NF_NON_SHARE->Fail
SDC/eMMC Boot...cmd SD_STATUS = 0x304
cmd SD_STATUS = 0x304
cmd SD_STATUS = 0x1304
Fail
BootWell BtHdr ID:0
0x92004000 = 0x00000952
0x92004008 = 0x08000010
0x9200400C = 0x0000030D
0x92004010 = 0x080B1833
0x92004014 = 0x4D832000
0x9200401C = 0x04080432
0x92004024 = 0x00660044
0x92004028 = 0x28282F2F
0x92005010 = 0x00000403
delay:512 Loop ...Finished
0x90005004 = 0xEC722E83
0x9000505C = 0x073232B4
0x90005104 = 0x1F800003
0x920050A0 = 0x00000098
0x93007004 = 0x41993A18
0x93007044 = 0x0500012D
0x9300E2B8 = 0x002E0200
0x9301F020 = 0x00000C02
0x9301F02C = 0x00000003
0x9301F038 = 0x00000FFF
delay:1 ms ...Finished
BootWell BtLdr ID:0
VERSION2013
###### eMMC_BL1 (Jul 17 2013 11:08:47) ######
pBoardVersion(0xB1007F78) = 0xB4B4B4B4, pBootFlag(0xB1007F7C) = 0xA55A7887
Cmd = 0x7007, SD_STATUS = 0x1304
### ERROR: the sd1 MBR's tag not match!
Cmd = 0x1008, SD_STATUS = 0x304
Cmd = 0x1037, SD_STATUS = 0x304
Cmd = 0x3001, SD_STATUS = 0x1304
###### sd card 0 no insert, or init failed! ######
sd/emmc init failed
>>>POWER OFF<<<The problem seems to be hat the MBR's tag not match.
Is anybody able to post his helpful comment here?