+- Spiffy Hacks (https://spiffyhacks.harmonypogo.com)
+-- Forum: Vtech InnoTab (https://spiffyhacks.harmonypogo.com/forum-1.html)
+--- Forum: InnoTab (https://spiffyhacks.harmonypogo.com/forum-2.html)
+--- Thread: Innotab/Storio eMMC boot (/thread-1048.html)
Innotab/Storio eMMC boot - Przemy - 12-28-2016
Hello,
I'd like to boot my sorio from SDcard instead of the internal eMMC. Here are some outputs I got:
Storio 3 without eMMC and without SDCARD:
Code:
iROM v3 Entry A400-S160 MHz
SPI Boot...(ID: 0x00) Fail
Nand Boot...NF_NON_SHARE->Fail
SDC/eMMC Boot...cmd SD_STATUS = 0x304
cmd SD_STATUS = 0x304
cmd SD_STATUS = 0x1304
Fail
cmd SD_STATUS = 0x304
cmd SD_STATUS = 0x304
cmd SD_STATUS = 0x1304
usb_reset()
usb_initial()
USB/ICE Service EntryWith a prepared SDcard I receive this:
Code:
iROM v3 Entry A400-S160 MHz
SPI Boot...(ID: 0x00) Fail
Nand Boot...NF_NON_SHARE->Fail
SDC/eMMC Boot...cmd SD_STATUS = 0x304
cmd SD_STATUS = 0x304
cmd SD_STATUS = 0x1304
Fail
BootWell BtHdr ID:0
0x92004000 = 0x00000952
0x92004008 = 0x08000010
0x9200400C = 0x0000030D
0x92004010 = 0x080B1833
0x92004014 = 0x4D832000
0x9200401C = 0x04080432
0x92004024 = 0x00660044
0x92004028 = 0x28282F2F
0x92005010 = 0x00000403
delay:512 Loop ...Finished
0x90005004 = 0xEC722E83
0x9000505C = 0x073232B4
0x90005104 = 0x1F800003
0x920050A0 = 0x00000098
0x93007004 = 0x41993A18
0x93007044 = 0x0500012D
0x9300E2B8 = 0x002E0200
0x9301F020 = 0x00000C02
0x9301F02C = 0x00000003
0x9301F038 = 0x00000FFF
delay:1 ms ...Finished
BootWell BtLdr ID:0
VERSION2013
###### eMMC_BL1 (Jul 17 2013 11:08:47) ######
pBoardVersion(0xB1007F78) = 0xB4B4B4B4, pBootFlag(0xB1007F7C) = 0xA55A7887
Cmd = 0x7007, SD_STATUS = 0x1304
### ERROR: the sd1 MBR's tag not match!
Cmd = 0x1008, SD_STATUS = 0x304
Cmd = 0x1037, SD_STATUS = 0x304
Cmd = 0x3001, SD_STATUS = 0x1304
###### sd card 0 no insert, or init failed! ######
sd/emmc init failed
>>>POWER OFF<<<The problem seems to be hat the MBR's tag not match.
Is anybody able to post his helpful comment here?