Did the flashing go correctly? If you shut it off before it finishes flashing or you use a bad SD card, that could cause issues. You can go through the un-bricking method, but it does require soldering and getting a USB to Serial adapter.

Bootup after flashing does take longer then usual, did you wait long enough during bootup? You can upload your firmware to zippyshare so I can look at it when I get a chance to see if there is anything wrong with it.

Good Morning! I use a 32GB HC I from Samsung. Windows can read it normally.

I'll waiting all night but the blackscreen (with a little bright) still there. Then i'll get off the battery and restart the device - same problem.

I zipping my backup (changed the signature in my backup too) and uploaded it to zippyshare. Send the link with PM.

Oh no, soldering - that's not for me.

I have try to repair my device with the official vtech recovery tool. For german device see here. No success!

Hello Deak Phreak sorry for my bad English. I just make a backup of firmware FR V1669.75.60113 my Storio 3s using the following link unfortunately I do not know patching to have modified firmware. You is it possible to do it for me from these files.
thank you

https://www.zipshare.com/download/eyJhcm...Y2ZiZmMifQ==

(02-21-2016, 01:48 AM)TheStranger Wrote: Good Morning! I use a 32GB HC I from Samsung. Windows can read it normally.

I'll waiting all night but the blackscreen (with a little bright) still there. Then i'll get off the battery and restart the device - same problem.

I zipping my backup (changed the signature in my backup too) and uploaded it to zippyshare. Send the link with PM.

Oh no, soldering - that's not for me.

I checked the runApp and it looks fine.  Did you use the correct command to package it up again? "mksquashfs squashfs-root modifiedfw.bin -all-root -noI".  Did you edit the file directly on the VM and not in windows? The only thing I can think of is that somehow the flashing went wrong. I know on mine, sometimes the SD card will disconnect when moving around the device. If that happens during flash, it can corrupt it or not fully flash.

The only real way to know what is wrong is to solder on a USB->Serial adapter and view the output of the device.

Pour ceux que cela intéresse le firmware modifier UK v75.60112 Marche pour flasher la version Fr v75.60113 du moins pour moi

(02-22-2016, 07:27 AM)crevette Wrote: Pour ceux que cela intéresse le firmware modifier UK v75.60112 Marche pour flasher la version Fr v75.60113 du moins pour moi

salut crevette tu et sur de cette information ?  si c'est vraiment le cas merci beaucoup a toi

(02-22-2016, 10:08 AM)lensois030190 Wrote:

(02-22-2016, 07:27 AM)crevette Wrote: Pour ceux que cela intéresse le firmware modifier UK v75.60112 Marche pour flasher la version Fr v75.60113 du moins pour moi

salut crevette tu et sur de cette information ?  si c'est vraiment le cas merci beaucoup a toi

Pour moi cela a fonctionné donc je pense que oui 

(02-22-2016, 10:59 AM)crevette Wrote:

(02-22-2016, 10:08 AM)lensois030190 Wrote:

(02-22-2016, 07:27 AM)crevette Wrote: Pour ceux que cela intéresse le firmware modifier UK v75.60112 Marche pour flasher la version Fr v75.60113 du moins pour moi

salut crevette tu et sur de cette information ?  si c'est vraiment le cas merci beaucoup a toi

Pour moi cela a fonctionné donc je pense que oui 

ok merci je vais essayer , par contre il n'y a pas eu de souci avec le flash de la console ?

(02-21-2016, 08:40 PM)Deak Phreak Wrote: I checked the runApp and it looks fine.  Did you use the correct command to package it up again? "mksquashfs squashfs-root modifiedfw.bin -all-root -noI".  Did you edit the file directly on the VM and not in windows?  The only thing I can think of is that somehow the flashing went wrong. I know on mine, sometimes the SD card will disconnect when moving around the device. If that happens during flash, it can corrupt it or not fully flash.

The only real way to know what is wrong is to solder on a USB->Serial adapter and view the output of the device.

Hi!

OK, next problem - the USB->Serial Adapter not working on Windows10 - i look at amazon for a good one.
I edit the file in the shared folder (edit/save in windows notepad++) and package it up in VM. Yes i use this command!

I will buy a soldering iron and a adapter - may take some time...