[Tutorial] - Getting shell access

[kevinf]

Thank you! This was the most fun project I have done lately... it "Just Works" ™.

I used a MAX3323 RS232 <-> TTL Uart converter.... as I had some around. Only required 4 capacitors and 3.3v.
http://www.maximintegrated.com/en/produc...ml/tb_tab0

I used the image on http://elinux.org/LeapFrog_Pollux_Platform:_Cartridge to find the 3.3v line.

6 (3.3v), 8(gnd), 11(rx), 12(tx)







Cart still works great too.