09-29-2014, 11:58 AM
It is pretty simple to modify the firmware. You just have to remove the portion that blocks apps from being run on the SD card. In newer firmwares, you also have to put in code to remount the SD card as executable since they change it so the SD card is mounted with noexec. That one file is the only one you need to modify. Be sure to look at modified code in one of the newest firmwares to get the most up to date code modifications.
I have not played around with the 3s+ so I can't help you much further then that. I would assume the code is basically the same with minimal differences. You can always connect a Serial converter and get shell access to poke around and do some debugging.
I have not played around with the 3s+ so I can't help you much further then that. I would assume the code is basically the same with minimal differences. You can always connect a Serial converter and get shell access to poke around and do some debugging.