+- Spiffy Hacks (https://spiffyhacks.harmonypogo.com)
+-- Forum: LeapFrog LeapPad (https://spiffyhacks.harmonypogo.com/forum-7.html)
+--- Forum: LeapTv (https://spiffyhacks.harmonypogo.com/forum-23.html)
+--- Thread: Mame (Arcade Emulator) running on the LeapTV! (/thread-859.html)
RE: Mame (Arcade Emulator) running on the LeapTV! - is0-mick - 01-17-2017
No, sorry, you cant just change the advmame file.
If I remember I did some code that reads the bluetooth controller and sends the presses to mame, however I only did the code for 1 joystick.
Mick
RE: Mame (Arcade Emulator) running on the LeapTV! - cruxible - 01-20-2017
(01-17-2017, 03:50 PM)is0-mick Wrote: No, sorry, you cant just change the advmame file.
If I remember I did some code that reads the bluetooth controller and sends the presses to mame, however I only did the code for 1 joystick.
Mick
Are you open to sharing the source?
RE: Mame (Arcade Emulator) running on the LeapTV! - is0-mick - 01-20-2017
Sure, only problem is I'd need to find it first... I think the PC it's on isn't hooked up at the moment.
Mick
RE: Mame (Arcade Emulator) running on the LeapTV! - gothdn - 03-23-2017
any news for support 2 controller ?
RE: Mame (Arcade Emulator) running on the LeapTV! - is0-mick - 03-23-2017
No, sorry. I haven't worked on this project in some time now.
The machine I used to compile isn't even hooked up at the moment.
RE: Mame (Arcade Emulator) running on the LeapTV! - gothdn - 04-04-2017
Since MAME has many good VS games, it will be great if we can play with 2 controllers. Anyway thanks for your hard work
RE: Mame (Arcade Emulator) running on the LeapTV! - Redw0lf - 08-12-2017
(01-06-2016, 04:15 PM)Hi! Any way that you could point me towards the files and instructions necessary to attempt to put MAME on my LeapTV?? The files you point to on Zippyshare are no longer there. Thanks a million!!! is0-mick Wrote:Cross compiled advance mame, and advance menu, did a few patches to make the controls work etc..
Seems to run quite well
If anyone wants to try this, you can download a copy from here:
http://www24.zippyshare.com/v/lKT231d6/file.html
You will also need to install my patched SDL libs here:
http://www64.zippyshare.com/v/zrBKgiNJ/file.html
You will need to activate FTP and Telnet. See Josh's tutorial here:
http://spiffyhacks.harmonypogo.com/thread-616.html
copy the libs to /lib folder and copy the THDS-0x00310035-000000 into /LF/Bulk/ProgramFiles.
(you may want to backup your original pointer training game first)
Alternatively install it to THDS-0x00310023-000000 which shows as the app store preview thing on my LFTV.
You will have to make sure that advmame's permissions are set to 755 (so it can execute). to do this, telnet into the box go to where advmame is, and type
chmod 755 advmame
or if you are using filezilla, right click on the advmame file, and select "File permissions" and type 755 in the box, press OK.
Feedback welcome
Mick
RE: Mame (Arcade Emulator) running on the LeapTV! - brucetp - 12-22-2017
Same here... anyone have the files they would share?
RE: Mame (Arcade Emulator) running on the LeapTV! - plummy - 01-03-2018
Same, anyone have access to the file in the OP?
RE: Mame (Arcade Emulator) running on the LeapTV! - Chris Eric - 03-07-2018
(01-06-2016, 04:15 PM)is0-mick Wrote: Cross compiled advance mame, and advance menu, did a few patches to make the controls work etc..Links Don't work. Try putting this on MEGA.
Seems to run quite well
If anyone wants to try this, you can download a copy from here:
http://www24.zippyshare.com/v/lKT231d6/file.html
You will also need to install my patched SDL libs here:
http://www64.zippyshare.com/v/zrBKgiNJ/file.html
You will need to activate FTP and Telnet. See Josh's tutorial here:
http://spiffyhacks.harmonypogo.com/thread-616.html
copy the libs to /lib folder and copy the THDS-0x00310035-000000 into /LF/Bulk/ProgramFiles.
(you may want to backup your original pointer training game first)
Alternatively install it to THDS-0x00310023-000000 which shows as the app store preview thing on my LFTV.
You will have to make sure that advmame's permissions are set to 755 (so it can execute). to do this, telnet into the box go to where advmame is, and type
chmod 755 advmame
or if you are using filezilla, right click on the advmame file, and select "File permissions" and type 755 in the box, press OK.
Feedback welcome
Mick