Init RTC....Fail Fail - Timeout Init RTC....Fail Fail - Timeout DDR size: 32MB SD Port0 Booting Fail - No/Bad Card Insert NAND Booting (2K-page 4 Address Cycle) Success Clock Skew DQSODS 0x1010 CKDQSDS 0x888800 Code Executes at 0x00900000 fsInitFileSyste [GNAND] GNAND Library Version: V1.02.3 [GNAND] GNAND format version on NAND chip: V1.01 [GNAND] NAND flash chip detected, chip ID is 0x98-0xF1 ! Linux version 2.6.17.14 (root@PST-Linux) (gcc version 4.2.1) #1454 Tue Jul 31 16 :20:57 HKT 2012 CPU: ARM926EJ-Sid(wb) [41069265] revision 5 (ARMv5TEJ) Machine: W55FA93 Memory policy: ECC disabled, Data cache writeback CPU W55FA93 (id 0x00fa5c30) w55fa93_external_clock = 12 MHz w55fa93_apll_clock = 72000 KHz w55fa93_upll_clock = 192000 KHz w55fa93_system_clock = 192000 KHz w55fa93_cpu_clock = 192000 KHz w55fa93_ahb_clock = 96000 KHz w55fa93_apb_clock = 48000 KHz CPU0: D VIVT write-back cache CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists Kernel command line: root=/dev/ram0 console=ttyS1,115200n8 rdinit=/sbin/init mem =32M PID hash table entries: 256 (order: 8, 1024 bytes) Console: colour dummy device 80x30 Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory: 32MB = 32MB total Memory: 28892KB available (1208K code, 137K data, 1048K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 SCSI subsystem initialized register clock device w55fa93_edma_init io scheduler noop registered (default) W55FA93 USB 2.0 Device Driver Initilization Success w55fa93 Sysmgr driver has been initialized successfully! w55fa93 BLT driver has been initialized successfully! ---w55fa93fb_init ----w55fa93 frame buffer init ###########w55fa93 frame buffer probe############ check_var(var=c05a5008, info=c05a5000) Console: switching to colour frame buffer device 60x34 w55fa93 LCD driver has been installed successfully W55FA93 uart driver has been initialized successfully! w55fa93-uart.1: w55fa93_serial1 at MMIO 0xb8008100 (irq = 24) is a W55FA93 RAMDISK driver initialized: 8 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice input: W55FA93 TouchScreen as /class/input/input0 [KEYPAD_DRV] w55fa93 Keypad driver has been initialized successfully! w55fa93-rtc w55fa93-rtc: rtc intf: sysfs w55fa93-rtc w55fa93-rtc: rtc intf: proc w55fa93-rtc w55fa93-rtc: rtc intf: dev (254:0) w55fa93-rtc w55fa93-rtc: rtc core: registered w55fa93-rtc as rtc0 Init Nuvoton RTC! W55FA93 Audio driver has been initialized successfully! REG_AIC_MECR = 0 REG_AIC_MECR = 0 NET: Registered protocol family 1 NET: Registered protocol family 17 w55fa93-rtc w55fa93-rtc: hctosys: invalid date/time Freeing init memory: 1048K init started: BusyBox v1.9.1 (2010-09-09 09:34:19 CST) ========> D+ Low DISSCONNECT PC 179 C_CmdMsg: Sync msgget() succeeded: msqid = 0 C_CmdMsg: Async msgnand: module license 'Proprietary' taints kernel. gget() succeeded: msqid = 32769 NAND: nand_init!!!!! FUNC(nand_init) LINE(2119) system_report enabled! FUNC(nand_init) LINE(2136) enable NAND ALE/CLE/CS0/CS1 pins FUNC(nand_init) LINE(2156) Init PortA4 and request_irq for nand_debug FUNC(nand_init) LINE(2195) Enable NAND_CD_IRQ FUNC(nand_init) LINE(2234) Setup nandcard detect timer scsi0 : Nuvoton W55FA93 On Board NAND DRIVER! [GNAND] GNAND Library Version: V1.02.3 fmiSMCheckBootHeader 1 Nand0: uLibStartBlock=33 [GNAND] GNAND format version on NAND chip: V1.01 [GNAND] NAND flash chip detected, chip ID is 0x98-0xf1 ! on board NAND size 120 MB (245760 sectors) Vendor: NUVOTON Model: GNAND DRIVER Rev: 2.00 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sda: 245760 512-byte hdwr sectors (126 MB) sda: Write Protect is off sda: got wrong page sda: assuming drive cache: write through SCSI device sda: 245760 512-byte hdwr sectors (126 MB) sda: Write Protect is off sda: got wrong page sda: assuming drive cache: write through sda: sda1 sda2 < sda5 > sd 0:0:0:0: Attached scsi removable disk sda W55FA93 SD Card driver has been initialized successfully! Success to Reserve Free Page from: 0xc1c00000, order:10, pages:1024 W55FA93 DEVMEM driver has been initialized successfully! boot_script: Change Directory boot_script: Create Directories boot_script: Mounting System Menu full path: /mnt/nand1-1/SystemMenu.bin Type: 0 Menu data path: /mnt/sysmenu/TitleSystemMenu/MainMenu/MenuData.swf boot_script: Mounting Resources boot_script: Run desktopManager Loading module /usr/gui/tslib/input.so Loading module /usr/gui/tslib/variance.so Loading module /usr/gui/tslib/dejitter.so Loading module /usr/gui/tslib/linear.so Linear calibration constants: 37459 211 -3819231 -110 26281 -4738218 65536 boot_script: Remove Windows Temporary Files root:~> KPD: cmd=80046B06 Linux_kernel: set language: 1 KPD: cmd=80046B07 C_CmdMsg: Sync msgget() succeeded: msqid = 0 C_CmdMsg: Async msgget() succeeded: msqid = 32769 #################### Copyright (c) 2009 - 2012 Nuvoton All rights reserved, FL3.1.6 (Apr 26 2011 - 1 5:51:54) #################### msgget: msgget succeeded: msqid = 0 msgget: msgget succeeded: msqid = 32769 Total MAX_DYNAMIC_MEM = 18 MB [auto_scale_up]/[off] [home_swf_path]/[/mnt/sysmenu/TitleSystemMenu/SystemMenu.swf] [quality]/[0] SetQuality: m_quality=0 [full_screen_display]/[off] [static_max_mem]/[512] [dynamic_max_mem]/[18000] [lcm_width]/[480] [lcm_height]/[272] [lcm_stride_width]/[480] [free_mem_safe_ratio]/[80] SetQuality: m_quality=0 SetQuality: m_quality=0 #### Validation pass The framebuffer device was opened successfully. xxddff 00000(31f0a8) SIInterface::initialize sec diff :0 1111 sampleRate=0, channels=0, bufferSize=4096 2222 Set Timer Interval=10 open key event1 failed Loading module /usr/gui/tslib/input.so Loading module /usr/gui/tslib/variance.so Loading module /usr/gui/tslib/dejitter.so Loading module /usr/gui/tslib/linear.so Linear calibration constants: 37459 211 -3819231 -110 26281 -4738218 65536 new file:/mnt/sysmenu/TitleSystemMenu/SystemMenu.swf Removing timerssssss load movie resulr=8604 <<< Removing timerssssss >>> start movie Adding timerssssss Set Timer Interval=10 MemFree = 21580 (KB), buffers = 80 (KB), cached = 5420 (KB), m_maxDynamicMem = 1 8432000 newFrameInterval=83, Min=2, Max=10 Set Timer Interval=8 StartMovie: m_quality=0 Clear dev frame buffer, ptich=960, height=272 Set Timer Interval=10 Load & start Movie: 310 ms Load & start Movie:: 3 sec 740 ms open file "/var/syslibrtc" fails! open file "/var/SYSLIB_SUS" fails! PWM value = 501 open file "/var/SYSLIB_BGMF" fails! open file "/var/SYSLIB_MH" fails! trace("[FSHelper readFile] Can not open file: /var/SYSLIB_MH for read!") height=272, width=480 KPD: cmd=80046B04 open file "/mnt/nand1-2/Dict/TitleDictionary.bin" fails! open file "/mnt/sd/Dict/TitleDictionary.bin" fails! open file "/mnt/nand2-1/Dict/TitleDictionary.bin" fails! open directory "/mnt/nand1-2/theme/" fails! change directory "/mnt/nand1-2/theme/" fails! trace("Theme not found!") trace("Loading /mnt/sysmenu/TitleSystemMenu/sysmenu.swf") trace("System Menu is running!") KPD: cmd=80046B04 open file "/var/SYSLIB_BGMF" fails! Initializing Sound Opening the sound device sampleRate:22050 channels:2, sampleSize:16, sampleRate:22050 fragmentSize = 4096 m_bufferSize = 0x4000 Lock:2 open directory "/mnt/nand1-2/theme/" fails! change directory "/mnt/nand1-2/theme/" fails! open directory "/mnt/nand1-2/theme/" fails! change directory "/mnt/nand1-2/theme/" fails! open file "/var/SYSLIB_SUS" fails! trace("A sound completed: 1") remove "/mnt/nand1-2/CERT/CertStatus.xml" fails! trace("newCertNum: 0")